Formula and worked example
Calculate net paved area first: gross coverage minus unpaved exclusions. Whole pavers = round up(net area × (1 + cutting allowance/100) ÷ working coverage per paver). Alternatively, multiply the allowance-adjusted area by the supplier’s pavers-per-area factor. Optional whole pallets = round up(whole pavers ÷ pieces per pallet). Working coverage must match the product’s installed module, including any assigned joint space; no joint width is added automatically.
The separate layer calculations use actual installed footprints, not paver purchase coverage. Compacted base volume = base footprint × compacted base depth. Installed bedding volume = net paved area × installed bedding depth. Base defaults to net paved area; an optional complete base-coverage override replaces this footprint when your plan has wider base support or different exclusions.
Example: 20 ft × 10 ft gives 200 ft². An illustrative 8 × 4 in working module covers 32/144 ft² per paver, so 900 pavers cover the area before allowance. At 5%, order 945 whole pavers. If the supplier packs 480 per pallet, two whole pallets contain 960 pavers. Neither cutting allowance nor pallet surplus expands the installed layers. With editable 4 in compacted base and 1 in installed bedding over 200 ft², base volume = 66.667 ft³ = 2.469 yd³, and bedding = 16.667 ft³ = 0.617 yd³.
Separate base coverage
If the complete measured base footprint is 240 ft², enter 240 as the override; do not enter only the extra 40 ft². At 4 in depth this gives 80 ft³ = 2.963 yd³ of compacted base. Bedding still covers the 200 ft² paved area. By default, unpaved planting beds or other exclusions reduce both layers; when your base plan treats those areas differently, enter the complete base footprint explicitly. No perimeter extension or excavation width is inferred.
Metric example
A 5 m × 4 m patio with 2 m² unpaved exclusions leaves 18 m². A 200 × 100 mm working module covers 0.02 m², giving 900 pavers before allowance and 945 with 5%. At 150 mm compacted base and 30 mm installed bedding, quantities are 2.7 m³ and 0.54 m³ respectively. A separate 22 m² base footprint gives 3.3 m³. These dimensions are arithmetic examples, not a recommendation for a material, loading or ground condition.
Installed volume versus delivery quantity
Base is reported in its compacted installed state. Bedding uses the final installed thickness that you enter; this is not automatically the loose screeded depth. This tool does not convert either layer to loose delivery volume, bags, mass or truck loads. Obtain a project-appropriate material conversion separately. Bedding material beneath the pavers is distinct from sand or other material placed in the joints; jointing quantities are not included.
Use the manufacturer’s product coverage and site-specific layer design. Mixed-size patterns, border allocation, cutting layouts, edge restraints, drainage design, paver thickness, excavation, geotextile overlaps, installation suitability and costs require separate decisions. Zero depth omits a layer; it does not establish that the patio may be installed without that layer.
Validation and rounding
Paver coverage and exact whole-piece/pallet rounding share the existing Paver Calculator engine. Gross and allowance-adjusted coverage are capped at 1 billion ft² and whole paver purchases at 10 million pieces. Layer depths are 0–100 ft, and each layer volume is capped at 1,000,000 m³. Base override must be positive and no more than 1 billion ft². Software limits are not allowable design limits. Exact decimal fractions carry the net paving area into layer calculations before three-decimal display rounding. Paver cutting allowance and whole-pallet surplus never multiply layer volumes.
Primary references
Belgard installation guidance distinguishes compacted aggregate base, bedding beneath pavers and jointing material, and explains that base depth depends on the application and soil. NIST SP 811 conversion factors supports the US/metric conversions. Sources checked 4 November 2026. The calculation examples above are original arithmetic; no universal layer depth or certified patio design is claimed.
Related tools
Use the Paver Calculator for pieces and pallets alone. For separate material estimates with supplied bulk density or product data, see the Gravel Calculator and Sand Calculator. Keep installed and loose material states distinct when transferring quantities.