Materials

Rebar Weight Calculator

Estimate nominal US steel rebar weight from bar size and developed length, in pounds, kilograms and tons.

Created and Written by: Designation: Founder

Technically reviewed by: Riya Kulkarni | BE Civil Engineer

Measure your rebar quantity

1. US nominal bar size

Uses the selected US nominal steel-bar weight from a published imperial table. Metric length input does not change the US size designation. Larger sizes use tabulated diameters; do not assume every bar diameter is its number divided by eight.

2. Developed bar length

Use the full developed length along each bar, including any already-specified hooks, bends and laps. The calculator does not determine those details. For mixed sizes or different cut lengths, calculate separate groups and add their base weights without applying allowance twice.

Length selectors convert valid measurements. Starting 10 pieces × 20 ft and 0% allowance are editable examples. Allowance adds planning length and weight; it does not choose or round stock bars, solve cuts or establish actual shipment weight.

Nominal steel weight excludes coatings, ties, couplers and accessories. Stainless, FRP, wire and supplier-specific products need their own mass data. This page does not select reinforcement, spacing, lap lengths or structural capacity.

EXAMPLE ESTIMATE
208.6 lb

94.619 kg · nominal weight including chosen allowance

US nominal bar
#5
Nominal diameter
0.625 in / 15.875 mm
Tabulated unit weight
1.043 lb/ft
Converted unit weight
1.552 kg/m
Piece count
10
Length per piece
20 ft
Entered total bar length
200 ft / 60.96 m
Base nominal weight
208.6 lb / 94.619 kg
0% planning allowance
0 lb
Allowance-adjusted length
200 ft
US short tons (2,000 lb)
0.104
Metric tonnes (1,000 kg)
0.095

Calculation basis

200 ft × 1.043 lb/ft = 208.6 lb base weight. Planning weight = base × (1 + 0/100). No stock-bar or package rounding is applied.

Nominal table values are rounded reference weights, not a scale measurement. Conversions use 1 lb = 0.45359237 kg and 1 ft = 0.3048 m. Calculations retain numeric precision before display rounding to 3 decimals; confirm actual supplied weight and material.

Formula and worked example

Base nominal rebar weight = total developed bar length × tabulated weight per unit length. In piece mode, total length = number of pieces × developed length per piece. Planning weight = base weight × (1 + allowance percentage ÷ 100). The allowance is optional and starts at zero.

Example: 10 pieces of US #5 bar, each 20 ft long, have 200 ft combined length. At the tabulated nominal 1.043 lb/ft, the base weight is 208.6 lb, or 94.619 kg. With zero allowance, planning weight is unchanged. A user-selected 10% allowance adds 20 ft and 20.86 lb, for 220 ft and 229.46 lb. The tool does not convert that allowance into a whole stock-bar order.

Choose the US bar designation

Select the actual US nominal bar size from your drawings or material specification. The available sizes are #3 through #11, plus #14 and #18. The calculator uses the imperial table’s nominal lb/ft values directly. It does not estimate mass from an assumed steel density or from measured outside ribs.

The selector also shows the tabulated nominal diameter. Larger designations do not follow a universal number-divided-by-eight diameter rule: for example, the nominal diameter of #9 is 1.128 in. Length entered in meters remains a US-designated bar; a metric input does not silently substitute a different national bar-size system.

Developed length and separate groups

Enter length measured along the bar, including any hooks, bends, laps or other details already specified in the takeoff. This calculator does not derive those lengths from member dimensions. A straight span alone may omit required developed length.

Piece mode assumes every entered piece has the same size and developed length. Use known-total mode when a verified takeoff already gives combined length for one bar size. For different sizes or cut lengths, calculate each group and add the base masses. Apply a planning allowance only once to the intended quantities.

Metric example

For 100 m of US #4 bar, the nominal table weight is 0.668 lb/ft. The calculated mass is approximately 99.409 kg, or 219.16 lb. This uses the US table value and exact unit conversions, so its kg/m value may differ slightly from separately rounded metric reference tables.

The base example of 200 ft is exactly 60.96 m. Converting the length input to meters should preserve its nominal weight. A US short ton means 2,000 lb; a metric tonne means 1,000 kg. The output labels distinguish them.

Nominal weight versus delivered weight

Nominal weights are rounded reference values. Actual product weight can vary; confirm the supplied material and shipment mass with the supplier. Coatings, couplers, tie wire and accessories are not added here. Stainless steel, FRP, wire products and other materials need their own unit-mass data.

An allowance is an explicit planning addition, not a manufacturing tolerance, minimum strength check or automatic stock-bar quantity. No bar-count rounding, stock-length cutting optimization or package count is performed. Spacing, lap design, bending schedules, structural capacity and reinforcement selection require separate calculations and specifications.

Units, precision and limits

Length inputs support feet, inches, yards, meters, centimeters and millimeters. Unit selectors convert valid measurements; changing length method preserves its own stored inputs and clears the old result until recalculation. Calculations use unrounded numeric values before displaying up to three decimals.

One international foot equals 0.3048 m and one pound equals 0.45359237 kg. Converted kg/m = tabulated lb/ft × 0.45359237 ÷ 0.3048. Very small positive outputs use scientific notation. Positive active lengths must be at least 0.000001 ft. Combined and allowance-adjusted lengths cannot exceed 1 billion ft. Piece count must be an integer from 1 to 1,000,000; allowance accepts 0–100%. These are data-entry bounds, not reinforcement recommendations.

Reference

Re-Steel Supply Company conversion table supplies the US imperial nominal bar diameters and lb/ft weights used by this page. Civilable converts those weights for metric output and keeps the US designations. Confirm project material and purchasing information with the supplier.

Related calculators

All calculators

TECHNICAL REVIEWER

Riya Kulkarni | BE Civil Engineer

Riya Kulkarni qualifications and experience
QualificationBE Civil – Shivaji University, Kolhapur (2018)
Experience8+ Years
Technical SpecialisationsStructural Engineering, Construction Materials, Site Execution and Concrete Technology.

Project experience

1. Shree Ganesh Residency

Location: Rajarampuri, Kolhapur

Project Type: G+4 Residential Apartment Building

Technical responsibilities
  • RCC structural construction coordination.
  • Reinforcement and shuttering inspection.
  • Concrete pouring and curing supervision.
  • Monitoring construction materials and workmanship.
  • Site quality-control documentation.

2. Vrindavan Heights

Location: Tarabai Park, Kolhapur

Project Type: G+5 Residential Building

Technical responsibilities
  • Structural drawing interpretation.
  • Reinforcement detailing checks.
  • Concrete workability and placement monitoring.
  • Construction sequencing and site coordination.
  • Building material quality assessment.

3. Sai Krupa Row Houses

Location: Kalamba Road, Kolhapur

Project Type: Residential Row Housing Development

Technical responsibilities
  • Foundation and plinth construction coordination.
  • Brick masonry and plastering inspection.
  • Concrete mixing, placement and curing.
  • Waterproofing and finishing work coordination.
  • Construction progress documentation.

4. Greenview Enclave

Location: Ujalaiwadi, Kolhapur

Project Type: G+3 Residential Apartment Complex

Technical responsibilities
  • Site execution monitoring.
  • RCC work and reinforcement inspection.
  • Construction material management.
  • Concrete quality testing coordination.
  • Workmanship and quality documentation.

5. Lotus Business Plaza

Location: Shahupuri, Kolhapur

Project Type: G+3 Commercial Building

Technical responsibilities
  • Structural construction coordination.
  • Slab and column reinforcement inspection.
  • Concrete placement and quality monitoring.
  • Construction activity sequencing.
  • Contractor and site-team coordination.

6. Omkar Residency

Location: Kadamwadi, Kolhapur

Project Type: G+5 Residential Apartment Building

Technical responsibilities
  • Foundation and superstructure execution coordination.
  • Reinforcement and formwork inspection.
  • Concrete testing and curing monitoring.
  • Material specifications and quality checks.
  • Site inspection reporting.

7. Silver Oak Villas

Location: Kasaba Bawada, Kolhapur

Project Type: Independent Residential Villa Development

Technical responsibilities
  • Residential foundation construction.
  • RCC structural component inspection.
  • Masonry and plastering quality checks.
  • Flooring and finishing coordination.
  • Site execution and material monitoring.

8. Pratham Commercial Complex

Location: Ruikar Colony, Kolhapur

Project Type: Commercial and Retail Building

Technical responsibilities
  • RCC construction coordination.
  • Concrete quality-control procedures.
  • Structural component inspection.
  • Construction material assessment.
  • Execution progress and quality reporting.