Formula and worked example
For a uniform pavement layer, in-place compacted volume V = paving area A × compacted thickness t. Convert dimensions to consistent units first. An optional material allowance p adds V × p/100; the adjusted quantity is V × (1 + p/100). Multiply by the compacted bulk mixture density to estimate weight. Apply the allowance once. The adjusted volume is a compacted-volume equivalent for material planning, not the volume of loose asphalt in a truck.
Example: 20 ft × 12 ft gives 240 ft². A compacted thickness of 3 in = 0.25 ft gives 60 ft³ = 2.222 yd³. At an illustrative 145 lb/ft³, in-place mixture weight is 8,700 lb = 4.35 US short tons = 3.946 metric tonnes. A 5% material allowance adds 3 ft³ equivalent and 435 lb. The adjusted estimate is 63 ft³ and 9,135 lb = 4.5675 US short tons, displayed as 4.568. The finished layer remains 3 in thick.
Metric and known-area examples
For 100 m² at 50 mm compacted thickness, volume = 100 × 0.05 = 5 m³. A stated 2,400 kg/m³ density gives 12,000 kg = 12 metric tonnes. With 10% allowance, use 5.5 m³ equivalent and 13,200 kg = 13.2 metric tonnes. A separate example of 9 yd² at 4 in thickness gives exactly 1 yd³ = 27 ft³; at 145 lb/ft³ it weighs 3,915 lb = 1.9575 US short tons.
Use the correct material basis
Enter the bulk density of the compacted asphalt mixture matching the thickness basis, including aggregate and air voids. Pure asphalt binder density and theoretical maximum mixture density are different quantities. The 145 lb/ft³ starting value is only an editable example; verify the appropriate mixture value with your project or supplier. This calculator does not infer density from a mix name or design a compaction target. Turn weight estimation off when suitable density is unavailable.
A US short ton is exactly 2,000 lb. A metric tonne is 1,000 kg. One avoirdupois pound is exactly 0.45359237 kg. The results label both ton systems so that a numeric quantity is not silently treated as the other unit. This is mixture quantity, not asphalt binder content or an acceptance test.
Area, thickness and scope
For a level rectangular layer use length × width. A known area can be entered in ft², yd², m² or international acres. For a sloping layer, use area measured along that layer with thickness measured perpendicular to it. Coverage modes are alternatives and retain their separate entries; they are not added together. For separate layers or nonuniform thickness/density, make separate takeoffs and combine like material states with care.
No aggregate base, milling, tack coat, binder percentage, loose-lift thickness, truck loads, cost, supplier minimum, lift sequence or pavement design is included. A material allowance is an explicit planning addition, not an automatic compaction correction. Confirm final quantities and specifications separately.
Validation and rounding
Active dimensions must be 0.000001–1,000,000 ft after conversion. Known area is 0.000000000001–1,000,000,000,000 ft²; in-place volume is capped at 1,000,000 m³. Allowance is 0–100% with four decimal places. Density is positive from 0.001 to 10,000 kg/m³ equivalent. These software limits are not recommended pavement dimensions or mix-density ranges. Hidden fields are ignored when their option is inactive. Calculations use exact decimal fractions before three-decimal display rounding; density-unit conversion rounds input to twelve decimal places. No tonnage or supplier-order ceiling is applied.
Primary references
Asphalt Institute engineering FAQs describes area/thickness volume followed by in-place mixture density and ton conversion. NIST SP 811 conversion factors supports the unit conversions. Our examples and allowance calculations are independent arithmetic, not supplier quotes or project specifications. Sources checked 4 November 2026.
Related tools
Measure coverage with the Square Footage Calculator, or convert quantities with the Cubic Yard Calculator. Use the Gravel Calculator for a separate granular material estimate; asphalt and base-course densities should not be interchanged.