What is a cubic yard?
A cubic yard is a unit of volume: a cube measuring 1 yard on each side. Since a yard is 3 feet, that cube contains 3 × 3 × 3 = 27 cubic feet. A square yard measures area and needs a depth before it can become a volume.
Calculate from dimensions
For a rectangular area, volume = length × width × depth. For a circular area of constant depth, volume = π × diameter² / 4 × depth. Convert all dimensions to the same length unit before multiplying. This calculator supports a separate unit for each measurement and converts internally to feet.
Multiply the volume of one area by the number of identical, non-overlapping areas. Use quantity 1 when the dimensions already represent the full combined space. Divide the resulting cubic feet by 27 for cubic yards.
Worked example: a shallow rectangular bed
A 12 ft × 9 ft bed at a uniform 3 in depth has a depth of 3 / 12 = 0.25 ft. Volume = 12 × 9 × 0.25 = 27 ft³ = 1 yd³ = 0.764554857984 m³. Two identical beds require 2 yd³ before any extra material.
Convert a known volume
Choose Convert a known volume when you already know the quantity in cubic feet, cubic yards, cubic meters or liters. The volume unit selector retains your numeric entry; choose the unit that matches it. No shape or repeated-area inputs apply in this mode. A volume of zero converts to zero.
Conversions: yd³ = ft³ / 27; yd³ = m³ / 0.764554857984; yd³ = liters / 764.554857984. One cubic foot equals 0.028316846592 m³. One liter equals 0.001 m³. These use the international foot and yard.
Optional extra material
The calculator starts at 0% extra so it reports geometric volume directly. If you choose an allowance, total = base volume × (1 + extra / 100). For example, 10% extra on 1 yd³ gives 1.1 yd³. Extra material is added once after any identical-area quantity.
Use the allowance agreed for the material and application. This tool does not automatically model soil swell, settlement, compaction, moisture or delivery increments. If a supplier sells whole or fractional yard increments, confirm the final order quantity separately.
Volume and weight are different
The same cubic-yard volume can weigh different amounts for soil, mulch, gravel or other materials. A weight calculation needs a suitable bulk density and moisture basis. This page estimates volume only. Irregular stockpiles, sloped surfaces and varying depths need a different geometric takeoff or several non-overlapping measurements.
Related tools
For concrete-specific section takeoffs use the Concrete Calculator. For a rectangular slab with openings and perimeter edges use the Concrete Slab Calculator. For general unit conversions use the Unit converter.
Reference
NIST SP 811: conversion factors provides the unit-conversion basis. The cubic-volume factors above are derived from 1 ft = 0.3048 m and 1 yd = 0.9144 m.