How much concrete does a slab need?
Measure the outside rectangle, enter the uniform slab thickness, then deduct the combined area of full-depth openings. The calculator starts in feet and inches and returns cubic yards, cubic feet and cubic meters. Every unit selector converts your entered measurement.
Slab and thickened-edge formulas
After converting lengths to feet, gross area = L × W. Net area = L × W − opening area. Slab body volume = net area × thickness t.
For a uniform inward edge band of width b on all four sides, its plan area is L × W − (L − 2b) × (W − 2b). Additional edge concrete = band area × (total edge depth D − t). This counts each corner once and adds only the depth below the slab body.
Base volume = slab body + additional edge concrete. Total volume = base × (1 + allowance / 100). Divide ft³ by 27 for yd³; multiply ft³ by 0.028316846592 for m³.
Worked example: openings and a thickened perimeter
A 20 ft × 12 ft slab, 4 in thick, has a 12 ft² interior opening. Its net area is 228 ft² and its slab body contains 76 ft³. A 1 ft wide band with 12 in total depth has a plan area of 60 ft² and adds 40 ft³ below the slab. Base volume is 116 ft³. With 5% allowance, the total is 121.8 ft³, or 4.511 yd³ (3.449 m³).
Measure the correct edge depth
Enter the total depth from the slab top to the underside of the thickened edge. Do not enter just the additional depth. The edge width is measured inward from the outside boundary. The band must be narrower than half the shorter slab dimension.
Which openings can I deduct?
Deduct full-depth openings that lie inside the slab without overlapping one another or the edge band. Add each rectangular opening’s length × width; for a circular opening use π × diameter² / 4. The calculator checks the total opening area, but cannot verify locations or shape fit. Verify those on the plan. Partial-depth recesses, irregular footprints, tapered edges and interior beams require a separate takeoff.
Allowance and final order
The 5% starting allowance is an editable example, not a prescribed order quantity. Confirm dimensions, uneven ground, placement losses and delivery increments with your project team and supplier. This calculator estimates quantity only; it does not design slab thickness, reinforcement, bearing capacity or concrete strength.
References